Small Compressed Air Dryers

Small Flow Regenerative Desiccant Dryers

	Van Air MHL Series - Mini Heatless Regenerative Dryers For flows 3 through 35 SCFM. Ideal for OEM packages, laboratories, and point-of-use applications. Constant -40°F to -100°F pressure dewpoint. Factory rechargeable, activated alumina desiccant towers.

	TWIN TOWER ENGINEERING, INC. Twin Tower Engineering, Inc. designs and manufactures compressed air dryers, gas purifiers and adsorbers for industrial, pneumatic systems, laboratory and process applications. Dry air dewpoints to better than -100⁰F, and gas removal effiencies of less than 1 PPM are available. Other products include compressor-dryer-filter packages, moisture indicators, and electronic humidity alarms.

	SUNSEP-W ^tM Membrane Air Dryers - At the heart of the SUNSEP-W ™ brand membrane air dryer technology is the patented membrane fibers developed by Asahi Glass Company (AGC) which has nearly 40 years of experience in the separation of gases with membranes. The Sunsep drying process works by passing compressed air inside the hollow fiber membranes where the water vapor molecules permeate through the wall of the membrane leaving the oxygen and nitrogen molecules to exit the outlet as dry air. The permeated water vapor is then swept away by a small amount of dry air fed back over the outside of the membrane fibers through a purging valve or orifice. Click here Membrane Dryer brochure.

Dry Air Packages from Twin Tower Engineering
	Twin Tower Engineering can design a complete clean/dry air delivery system for your application requirements. Please contact us with your application details by phone, fax or email and let us quote on a compressor, dryer, adsorber, filtration, instrumentation, etc., put in a package to suit your needs. Call toll free for more information 866-660-0208

Non-Regenerative Dryers
	Mini Dryers-with Disposable Cartridges Supplies -40°F pressure dewpoint for pneumatic equipment that requires a small volume of extremely dry compressed air. Model MD4/IND uses a molecular sieve cartridge, and a moisture indicator on top of the dryer housing to indicate when to change the cartridge. The model MD4/SW uses a color-change silica gel cartridge, and has a sight window to view the condition of the desiccant.

	Operation: Wet inlet air is channeled around and down the housing interior and then flows upward through the desiccant where moisture is adsorbed by the desiccant. The outlet air has a constant -40°F pressure dewpoint.

	Van Air MD-35 Ideal for equipment that requires small volumes of extremely dry air. Designed for point-of-use applications that are not easily handled by the smaller MD-4 above. Only inlet and outlet connections are needed. Sight window shows desiccant condition. Color indicating desiccant.

Air & Vacuum Process, Inc.
14090 FM 2920 Suite G-537
Tomball, TX 77377
Toll Free: 866-660-0208
Local: 281-866-9700
Fax: 281-866-9717

E-mail