Dry-O-Lite : Desiccants
 Absorbent Desiccant
GasDry Prime
 Van
Gas Technologies' GasDry Prime™ is a low-cost absorbent
deliquescent desiccant formulated for single and sequential
tower natural gas dryers. This wet bed desiccant is a
hard tablet formed from hygroscopic materials that attract
and hold moisture. The materials in the compound are non-toxic
and completely soluble in water.
As the desiccant tablet draws water vapor out of the natural gas, the surface of the tablet slowly dissolves and forms a solution which eventually drops from its surface. The deliquescent desiccant tablet continues to remove moisture and forms this solution until the tablet is entirely consumed. When used in a properly sized single or sequential tower desiccant gas dryer, GasDry Prime will remove sufficient moisture vapor to establish a 55% RH in the gas line.
For over six decades, Van Gas Technologies has been an industry leader in absorbent desiccant technology. Please contact us today with any questions you may have or to place your order.
Features and Benefits
- No energy or fuel gas consumption
- Prevents condensation
- Prevents wintertime gas line freeze-ups and hydrate formation
- Environmentally safe
- Low cost of operation relative to glycol or regenerative desiccant dryers
- Little or no maintenance
- Available in 50# bags, 50# pails, 506# steel drums and 2,000# bulk bags
- 3/4" tablet
GasDry Peak
 Van
Gas Technologies' GasDry Peak™ is an absorbent deliquescent
desiccant formulated for single and sequential tower natural
gas dryers. This wet bed desiccant is a hard tablet formed
from hygroscopic materials that attract and hold moisture.
The materials in the compound are non-toxic and completely
soluble in water.
As the desiccant tablet draws water vapor out of the natural gas, the surface of the tablet slowly dissolves and forms a solution which eventually drops from its surface. The deliquescent desiccant tablet continues to remove moisture and forms this solution until the tablet is entirely consumed. When used in a properly sized single or sequential tower desiccant gas dryer, GasDry Peak will remove sufficient moisture vapor to establish a 33% RH in the gas line.
Recommended for use where the operating temperature is at or below 80° F, GasDry Peak is specifically formulated to be used as a first stage absorbent desiccant in the natural gas dehydration process. This deliquescent desiccant is also highly recommended for point of use applications. When applied in higher operating temperatures, a pre-bed of ceramic bead support is recommended to minimize channeling in the desiccant bed.
For over six decades, Van Gas Technologies has been an industry leader in absorbent desiccant technology. Please contact us today with any questions you may have or to place your order.
Features and Benefits
- No energy or fuel gas consumption
- For operating temperatures 80°F and lower
- Prevents condensation
- Inhibits natural gas hydrate formation
- Prevents gas line freeze-ups
- No BTEX emissions
- Environmentally safe
- Available in 50# bags, 50# pails, 506# steel drums and 2,000# bulk bags
- 3/4" tablet
GasDry MAX 
GasDry Max™ is the most aggressive absorbent deliquescent desiccant for use with single and sequential tower natural gas dryers on the market. This wet bed desiccant is a hard tablet formed from hygroscopic materials that attract and hold moisture. The materials in the compound are non-toxic and completely soluble in water.
As the desiccant tablet draws water vapor out of the natural gas, the surface of the tablet slowly dissolves and forms a solution which eventually drops from its surface. The deliquescent desiccant tablet continues to remove moisture and forms this solution until the tablet is entirely consumed. When used in a properly sized single or sequential tower desiccant gas dryer, GasDry Max will remove sufficient moisture vapor to establish a 13% RH in the gas line.
GasDry Max is recommended for use where the operating temperature is at or below 100° F. For applications where the temperature conditions exceed 100° F, a pre-bed of ceramic bead support is recommended to minimize channeling in the desiccant bed.
For over six decades, Van Gas Technologies has been an industry leader in absorbent desiccant technology. Please contact us today with any questions you may have or to place your order.
Features and Benefits
- Requires no energy or fuel gas consumption
- For operating temperatures 100°F and lower
- Prevents condensation
- Inhibits gas hydrate formation
- Prevents gas line freeze-up
- Environmentally safe
- Replace TEG dehydrators
- No BTEX emissions
- 1" diameter tablet
- Little or no maintenance required for drying equipment
- Available in 7# pails and 25# pails
|
