Mini Air Dryers
Twin Tower Engineering:
Regenerative Desiccant Air Dryers
Using Pressure Swing Adsorption (PSA) technology, the Twin Tower Engineering heatless regenerative air dryers are designed to maximize the efficiency of the drying process. Ultra-Dry compressed air dew points to better than -100°F can be achieved.
Some Typical Dry Compressed Air Applications:
- Ozone Generators
- Environmental Chambers
- Pneumatic Automation Systems
- Medical Air Compressors
- Dental Air Compressors
- Bus Door & Locking Systems
- CEMS Systems
- FTIR Spectrometers
- NMR Spectrometer
|
- Laboratory Analyzers
- Dry Sprinkler Systems
- Outdoor HVAC Controls
- Electronic Chip Testing
- Dry Nitrogen Replacement
- Air Bearings
- Vortex Tubes
- Antenna Pressurization
|
- Waveguide Drying
- Air Brushing
- Gas Chromatographs
- Robotic Machinery
- Car Wash Controls
- Graphic Printers
- Air Turbines
- Air Operated Pumps
|
|
MDH-Series
Miniature Desiccant Air Dryers capacity from 0.1 to 3.2
SCFM
MDH-SERIES
Miniature Desiccant Air Dryers
Ultra-small air dryers can be used with fractional horsepower air compressors. These units are heatless regenerative desiccant air dryers designed to produce low dew points. Extremely small footprint allows for packaging inside equipment cabinets or at point-of-use.
 Features:
- Very dry outlet air to -100° F dew point
- Flow capacities of 0.1 SCFM to 3.2 SCFM
- Efficient drying at pressures of 30 PSIG to 120 PSIG
- Miniature design requires minimal space in OEM equipment
- Install at point-of-use or use with fractional horsepower air compressors
- Precision orifices to control purge
- solid-state timer with memory for accurate cycling
- Non-plugging and non-corroding purge mufflers
- Power consumption is 6 watts or less
|
|
VSA-Series
Desiccant Air Dryers capacity from 2.8 to 12 SCFM
VSA-SERIES
Heatless Regenerative Air Dryers
Economical and compact, these heatless desiccant compressed air dryers provide low dew points to -100°F ADP (atmospheric dew point). This proven "no-frills" design uses Pressure Swing Adsorption (PSA) technology and will provide years of trouble-free service.
 Design Features of VSA-Series Air Dryers:
- 6", 9", 12", and 20" Desiccant Chambers
- Flows to 12 SCFM
- Max Pressure 150 PSIG
- Compact and lightweight aluminum construction
- solid-state timer with built-in memory
- NEMA 1 Electricals
- 1 minute purge cycle
- Fixed orifice purge control
- Two inlet and two outlet ports for ease of installation
- Standard non-plugging and non-corroding purge mufflers
|
|
